REFRESHSOURCE=NONE, POWERMODE=HIGHPOWER, CONVMODE=CONTINUOUS, TRIGMODE=NONE
No Description
| CONVMODE | Channel 1 Conversion Mode 0 (CONTINUOUS): DAC channel 1 is set in continuous mode 1 (SAMPLEOFF): DAC channel 1 is set in sample/shut off mode |
| POWERMODE | Channel 1 Power Mode 0 (HIGHPOWER): Default is High Power Mode 1 (LOWPOWER): Set this bit for Low Power Mode |
| TRIGMODE | Channel 1 Trigger Mode 0 (NONE): No Conversion Trigger Source Selected for Channel 1 1 (SW): Channel 1 is triggered by Channel 1 FIFO (CH1F) write 2 (SYNCPRS): Channel 1 is triggered by Sync PRS input.PRS Trigger should have the same clock group as VDAC. 4 (INTERNALTIMER): Channel 1 is triggered by Internal Timer Overflow 5 (ASYNCPRS): Channel 1 is triggered by Async PRS input |
| REFRESHSOURCE | Channel 1 Refresh Source 0 (NONE): No Refresh Source Selected 1 (REFRESHTIMER): CH1 Refresh Triggered by Refresh Timer Overflow 2 (SYNCPRS): CH1 Refresh Triggered by Sync PRS. PRS Trigger should have the same clock group as VDAC. 3 (ASYNCPRS): CH1 Refresh Triggered by Async PRS |
| FIFODVL | Channel 1 FIFO Low Watermark |
| HIGHCAPLOADEN | Channel 1 High Cap Load Mode Enable |
| KEEPWARM | Channel 1 Keepwarm Mode Enable |